A bi‐objective approach to reschedule new jobs in a one machine model

We consider a one machine scheduling model, minimizing a classical objective function—either the total completion time or the maximum tardiness—and with two sets of jobs: one with initial jobs already scheduled and one with new jobs that must be inserted in the schedule. As such rescheduling can create a modification of the schedule of the initial jobs, a disruption objective is considered in addition to the original objective. This additional objective can be formulated in four different ways. Such model has been introduced by Hall and Potts, minimizing either a linear aggregation of the two objectives or the initial objective under a constraint giving an upper limit of the disruption objective. In this paper, the aim is to obtain the set of efficient schedules in regard to the two objectives. Algorithms are provided for the eight possible bi‐objective problems and illustrated by some didactic examples.     

过磷酸钙喷涂法生产硫基复合肥工艺研究

简述了过磷酸钙喷涂法生产硫基复合肥的反应原理及工艺方案、实施方案的确定。给出了该工艺较传统工艺的优势及特点。     

CaB6陶瓷研究的进展

综合介绍了CaB6陶瓷粉末、多晶体和单晶体的制备方法。评述了各种方法的基本原理和特点。合成CaB6粉末最常用的方法为碳化硼法，此方法能够以低成本制备较纯的CaB6粉末。但是得到的粉末具有硬团聚现象，使CaB6粉末的烧结有一定的难度。由于CaB6在高温下具有高的化学活性和低的塑性,CaB6多晶多采用热压烧结的方法在高温高压下制备。单晶的制备主要采用区熔法和熔剂法。区熔法适合于生产大尺寸的CaB6单晶，而铝熔剂法制备的CaB6单晶尺寸最大为5mm，对测定其某些物理性能有一定的局限。对CaB6陶瓷的应用及国内外研究现状作了简要的概括，并对其今后的发展趋势作了展望。     

SC-1型乙烯裂解炉先进控制系统开发与应用

针对SC-1型乙烯气液相裂解炉控制问题,提出了一种鲁棒性较强的先进控制策略,开发了由“DCS控制层”和“上位机控制层”构成的先进控制系统.该系统有效地解决了燃料热值波动对裂解炉裂解气出口温度的影响,减少了裂解气出口温度和裂解炉总加工量的波动,实现了“卡边”控制及生产过程的安全逻辑保护,优化控制器可一键投运和切除,解决了裂解炉控制问题的复杂性.该系统成功应用于兰州石化46万吨／年乙烯装置,大幅度提高了装置的平稳率,提升了双烯收率,降低了装置能耗.     

Oxidation and reforming reactions of CH4 on a stepped Pt(5 5 7) single crystal

The oxidation and reforming kinetics of methane by O₂, CO₂ and H₂O were studied on a stepped Pt(5 5 7) single crystal from 623 to 1050 K under methane rich conditions. The rate of carbon deposition was followed by ex-situ Auger electron spectroscopy under non-oxidative conditions. The apparent activation energy for methane decomposition was significantly lower than the apparent barriers measured for both total oxidation, CO₂ and H₂O reforming. Total oxidation of methane to CO₂ and H₂O followed by combined dry and steam reforming (combined combustion-reforming) led to CO production rates which were higher than direct CO₂ or H₂O reforming rates. The enhanced rates are most likely due to the ability of adsorbed oxygen to prevent carbon nucleation and/or scavenge carbon enabling the reforming reaction to turnover on a larger fraction of sites. Comparable amounts of carbon were found by Auger electron spectroscopy measurements after both direct dry or steam reforming, while combined oxidation-reforming had considerable less carbon. During direct dry or steam reforming, CO₂ and H₂O serve only to scavenge adsorbed atomic carbon, while in the presence of oxygen, carbon is removed by both combustion and reforming routes.     

高收率合成DADE的新方法

在比较DADE的3条文献合成路线基础上，研究了以2-甲基-4，6-嘧啶二酮为母体用硝硫混酸硝化生成中间体2-(二硝基亚甲基)-5，5-二硝基-2H-嘧啶-4，6-二酮、中间体水解合成DADE的方法。DADE总收率达到83％以上，用IR、MS、NMR及元素分析鉴定了其结构。     

Effects of apitong (Dipterocarpus spp.) extractives on bond strength development and curing rate of adhesives

Emulsion polymer isocyanate ( ), polyvinyl acetate ( ) and resorcinol-formaldehyde ( ) adhesives were used to produce single lap shear specimens using resinous and non-resinous apitong (Dipterocarpus spp.) timbers. Tests showed that joints made with highly resinous apitong were about 40% weaker than similar joints made with non-resinous apitong. The resinous apitong was treated with different solvents to yield five different extractives which were characterized by infra-red analysis. Apitong extractives were then added to and adhesives and joints made with buna (Fagus crenata), a timber known to be low in extractives and easy to bond. Joints prepared using extractive-containing adhesives were generally weaker than those made with the unmodified adhesives. RF adhesives containing extractives cured more slowly than unmodified . It is thought that the acidic nature of the extractives changes the pH of the system sufficiently to affect the curing mechanism     

计算机仿真在高频电子线路教学中的应用

针对传统高频电子线路教学中存在的问题,提出在教学中引入计算仿真进行辅助分析与设计．阐述了Multisim的主要功能与特点,并利用Multisim对高频电路中的典型电路单调谐回路谐振放大器、环形调幅器进行了仿真,各项结果与理论推导相符．形象、生动的演示达到提高学生学习兴趣的效果．     

基于统计的中文机构名实体识别的研究

针对中文机构名实体的识别提出了利用隐马尔科夫统计模型的方法.同时,在此方法的基础上通过构建一元模型来补充识别那些缩写的和没有核心词的机构名,弥补了单一统计模型在机构名实体识别中的不足.实验证明二者相结合的方法能获得较高的准确率和召回率,具有可行性.     

660MW超临界机组循环水系统运行优化分析

结合沧东公司循环水系统的运行条件,以及优化循环水系统的运行方式,提出了低负荷单机单泵运行方式.同时根据相关计算和试验,对该类型机组采用单泵运行的可行性、安全性、经济性进行了分析,结果表明,660 MW同类型机组低负荷时采用单台循环水泵运行完全能满足机组正常运行的需要.